JS 3 BASIC TECHNOLOGY PAST QUESTIONS (BECE)

Practice also: JS 3 AGRICULTURAL SCIENCE PAST QUESTIONS (BECE) JS 3 ENGLISH LANGUAGE PAST QUESTIONS (BECE) JS 3 HOME ECONOMICS PAST QUESTIONS (BECE) JS 3 MATHEMATICS PAST QUESTIONS (BECE) JS 3 PHYSICAL AND HEALTH EDUCATION (BECE)

0%

BECE/JSCE (BASIC TECHNOLOGY)

BECE BASIC TECHNOLOGY APP

Questions will be picked at random from the question bank.

You can use the NEXT button to move to the next question, use the PREV button to move to the previous question, the CLEAR button to clear any answer of your choice and you have the FINISH button to end the exam if you choose to.

Any question not answered before the end of the exam time, will be marked as wrong and the exam will end by itself. so try to attempt all questions on time.

Goodluck!

1 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is not a purpose of lubricant

2 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The difference between rubber and plastic is that rubber is ___________ in nature

3 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

All the following are required in building EXCEPT _________

4 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

In a gear box if the driver gear has 120 teeth and revolves at 60 rev/min, what is the speed of the driven gear with 80 teeth?

5 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The energy generated when petrol is burnt inside the cylinder of a petrol engine is ___________

6 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Thermonic emission is the process of emitting electrons by the use of ____________

7 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used for cutting complex shapes and curves in woodwork?

8 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The easiest table top to clean and maintain is __________

9 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Mechanized process involves ____________

10 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

For safety purpose a good workshop should have the following EXCEPT ___________

11 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is NOT a tool used for site preparation?

12 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Tools used for digging and loosening the soft soil is called __________

13 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used in the transmission of motion in a bicycle?

14 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are used for producing air EXCEPT __________

15 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Plastics materials are used for making handle of cooking pots because they are ________

16 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which type of machine is used for producing cylindrical and tapered surface in metal work?

17 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The cutting tools fitted into the hole of the anvil is called

18 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is NOT a product of rubber?

19 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Application of hard and stainless surface to metal product to prevent rusting is called ___________

20 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Boring and Tenoning of wood can be carried out on ________

21 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The function of foundation in a building is to

22 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A professional job from which we earn living in life is called ________

23 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The forceful flow of water in pipes is known as __________

24 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

First Aid helps an injured person in the following ways EXCEPT __________­­___

25 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

High tension cable lines are usually made of __________

26 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The process of hammering metals to form shape is known as ________

27 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Cotton wool is used for the following EXCEPT for ____________

28 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Gear drives are used to transmit ___________

29 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The care of radio include the following EXCEPT ____________

30 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The angle of inclination  in isometric drawing is ____________

31 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

An amplifier is a device used to ___________ signal

32 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Hacksaw is a tool used for cutting _________

33 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are causes of accident in the workshop EXCEPT _____________

34 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Complete circuit must have all the following EXCEPT _____________

35 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The use of machine in the production and manufacture of things is called _________

36 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The force that slows down a moving body in air is known as _______

37 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used for marking and testing right angles surface?

38 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

File without a handle should not be used in the workshop so as to _________

39 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The preliminary work done to keep the site ready for the construction of a building is called __________

40 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Current is measured in amperes, resistance in Ohms and voltage in volts, what is the electrical instrument used in measuring ALL?

41 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A capacitor is a device used to __________

42 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The petrol used in car engine is a type of __________

43 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Pincers are used for _________

44 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Energy is the ability to _________

45 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of tools is ideal for removing slight irregularities from flat metal surfaces?

46 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of these foods CANNOT be stored in refrigerator?

47 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

An example of wood that do not shed their leaves is __________

48 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used as a measuring tool?

49 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The device used to convert analogue signals to digital signals is known as

50 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of these is NOT a woodwork measuring tool?

51 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following goggle is used when carrying out arc welding?

52 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

All the following are storage devices EXCEPT ___________

53 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Chain drives are used in the following machines EXCEPT __________

54 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The workshop equipment on which all metals to be beaten are placed is ___________

55 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Plastics are used in electrical connection as __________

56 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following devices is used to convert sound energy into electrical energy?

57 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The purpose of using aluminium as cooking utensil is because of it ________

58 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Cooling is produced in refrigerator by the principle of __________

59 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following countries make use of their natural resources EXCEPT ______________

60 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are wood work machine EXCEPT __________

61 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following tools is used for cutting tin sheet metal?

62 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following materials is NOT used for electricity transmission?

63 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The tools used for cutting sheet metal is known as ________

64 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The difference between thermoplastic and thermoset is

65 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following causes wears and tears of machine parts?

66 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are professions for studying basic technology EXCEPT _____________

67 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is NOT used is freehand sketching?

68 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

In electric circuit, the flow of current is controlled by ________

69 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Grubbing out of tree roots from the ground are camed out mechanical by __________

70 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are types of computer EXCEPT ___________

71 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is NOT a mechanical fastness?

72 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The process of liberating an electron by the use of heat is called ___________

73 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of these woodwork machines make use of endless saw blade?

74 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The amount of space within the boundary of a plane figure is known as ___________

75 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following shapes has an angle more than 180 degree?

76 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A thin sheet of wood obtained from log is known as __________

77 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Thin continuous lines are used for the following EXCEPT __________

78 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Mechanical engineering is involves in the following EXCEPT ________

79 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A photographic print of a plan for a building drawn with white lines and on blue background is called ___________

80 / 80

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A device used to connect or discount two revolving shafts in a transmission system is known as __________

Your score is

0%

Practice also:

JS 3 AGRICULTURAL SCIENCE PAST QUESTIONS (BECE)

Campus student 3

GET FULL SCHOLARSHIPS IN THE US

JS 3 ENGLISH LANGUAGE PAST QUESTIONS (BECE)

JS 3 HOME ECONOMICS PAST QUESTIONS (BECE)

JS 3 MATHEMATICS PAST QUESTIONS (BECE)

JS 3 PHYSICAL AND HEALTH EDUCATION (BECE)

Top 10 Affordable or Tuition-Free Universities in the USA

Top Universities and IELTS-Free Scholarships

Free Tuition: Study at German Universities

Companies Sponsoring Work Visas in Canada 2024

Master’s Scholarships in the UK without IELTS

Top 25 Master’s Scholarships Without IELTS or TOEFL

Top 15 USA Scholarships Offering $50,000+

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top